An FRP vinyl liner pool construction process has ten main Stages:
- Panel Fitting
- Panel Concreting
- Membrane Installation
- Finished Swimming Pool
Excavation is the process of moving earth, rock or other materials with tools & equipment. Excavation is used in construction to create Swimming pools. Some of the different processes used in excavation include trenching, digging, dredging and site development.
Soling is usually done by laying hand-packed hard and durable stone-like basalt etc., by wedging and packing.
PCC is a Swimming Pool construction material Generally used as a binding material and is composed of Cement.
4. Panel Fitting
Retrofitting of FRP Panels takes place on-site as per the shape and size of the Swimming Pool.
5. Panel Concreting
Panel Concreting is done to fix the FRP Panels in-ground firmly.
Now the Plumber begins his Plumbing process for Filteration and Balancing Tank.
7. Membrane Installation
Our skilled technicians now begin welding Pool liner or Membrane for the final step of Pool Installation.
There are three common types of Steps for a vinyl liner pool:
- White plastic steps
- Vinyl over steps
- A ladder
White plastic steps are the standard for vinyl liner pools. They’re made of polymer, attached to the pool walls, and jut out from the main body of the pool.
Vinyl over steps is premade, with many options available. You have to select the liner to fit over the steps.
A ladder is a removable metal ladder that you install into the patio. It hangs over the edge of the pool.
Coping is the border around the top perimeter of the pool—the transition from the pool to the patio. For vinyl liner pools, the standard is white aluminum C-channel coping.
The aluminum can be painted in different colors, but white is the most common.
The term C-channel (or U-channel) means that it’s bullnose (or half-round, like a C shape) that’s bolted at the top of the pool wall panel as a permanent border for the patio concrete.
- For cantilevered coping, the builders pour patio concrete up to a styrofoam form at the edge where the pool meets the patio. When they remove the form, the concrete itself is the edge (often bullnose).
- Flat-mount coping is flat and secures your vinyl liner. You can add different coping, like fancy pavers, on top of it.
10. Finished Swimming Pools
Liner Pool Advantages:
- Lower preliminary price. Vinyl liner swimming pools have the preliminary bottom price of any three forms of in-Ground swimming pools. (7 to fourteen lac much less than fiberglass and Concrete Pools).
- Best Value. Per Square foot, the vinyl liner pool offers you the maximum swim room for much less money.
- Customizable form and size. There are few if any barriers to the length, width, and intensity of vinyl liner swimming pools. Although there are a few widespread sizes and shapes, any of them may be customized.
- Customizable options. Today’s vinyl liner pool can, without problems, have built-in seats, benches, tanning ledges, steps, and swim-outs.
- Non-abrasive floor. The floor of a vinyl liner pool is clean to touch and extraordinarily snug to swimmers.
- Lower maintenance. The floor of a vinyl liner pool is nonporous. This reduces the hazard for algae increase and the quantity of sanitizing chemical compounds required to keep the pool.
- Vinyl liners are without problems repaired or changed.
- Vinyl liners are without problems repaired. Should a leak occur, as soon as it’s miles found, an underwater patch package may be used to restore maximum leaks in as low as 5-10 minutes.
- Vinyl liners are without problems changed with little or no downtime. It most effectively takes approximately two days to finish a vinyl liner replacement. On average, a vinyl liner will close between 7 and 10 years. (The oldest liner ever changed using Swimwell was ten years old Resort Pool ). This isn’t always typical. Nevertheless, we usually update liners which can be 12-15 years old.)
Get Latest Pricing of Liner Pool Construction